HI TEMP 300-AMB
Manufacturer: 3D Systems
Type: High Temp
HI TEMP 300-AMB is a High Temp resin manufactured by 3D Systems, pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. With 2.3% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately €290.00.
Key Properties
- Elongation at Break: 2.3% — minimal stretch — rigid
- Viscosity: 1,725 mPa·s — high — benefits from pre-warming and longer drain times
- Impact Resistance: 10 J/m — low impact toughness
Best Applications for HI TEMP 300-AMB
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for HI TEMP 300-AMB| Resin Type | High Temp |
|---|
| Shore Hardness | Shore D 89 |
|---|
| Viscosity | 1725 cP mPa·s |
|---|
| Solid Density | 1.3 g/cm³ g/cm³ |
|---|
| Tensile Strength | 77 MPa MPa |
|---|
| Young's Modulus | 4100 MPa MPa |
|---|
| Elongation at Break | 2.3%% |
|---|
| Flexural Modulus | 4300 MPa MPa |
|---|
| Flexural Strength | 85 MPa MPa |
|---|
| Izod Impact (Notched) | 10 J/m J/m |
|---|
| Price | €290.00 |
|---|
Handling & Printing Notes
With a viscosity of 1,725 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.3 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from 3D Systems for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About 3D Systems
Pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. Its industrial Figure 4, ProJet/VisiJet and Accura material lines cover prototyping and production.
Headquarters: Rock Hill, SC, USA
View all resins from 3D Systems →
Frequently Asked Questions
What is HI TEMP 300-AMB used for?
HI TEMP 300-AMB is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does HI TEMP 300-AMB cost?
HI TEMP 300-AMB is priced at approximately €290.00. Check 3D Systems's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from 3D Systems →