FLEX-BLK 10
Manufacturer: 3D Systems
Type: Flexible
FLEX-BLK 10 is a Flexible resin manufactured by 3D Systems, pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. With 104% elongation at break, this resin is designed for applications requiring tough, impact-resistant applications. priced at approximately €240.00.
Key Properties
- Elongation at Break: 104% — stretches significantly before breaking — flexible
- Viscosity: 2,108 mPa·s — high — benefits from pre-warming and longer drain times
- Impact Resistance: 55 J/m — good impact toughness
Best Applications for FLEX-BLK 10
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
- Tough enclosures, protective covers, and impact-resistant parts
Technical Specifications
Technical data for FLEX-BLK 10| Resin Type | Flexible |
|---|
| Shore Hardness | Shore D 76 |
|---|
| Viscosity | 2108 cP mPa·s |
|---|
| Solid Density | 1.15 g/cm³ g/cm³ |
|---|
| Tensile Strength | 46 MPa MPa |
|---|
| Young's Modulus | 1400 MPa MPa |
|---|
| Elongation at Break | 104%% |
|---|
| Flexural Modulus | 990 MPa MPa |
|---|
| Flexural Strength | 37 MPa MPa |
|---|
| Izod Impact (Notched) | 55 J/m J/m |
|---|
| Price | €240.00 |
|---|
Handling & Printing Notes
With a viscosity of 2,108 mPa·s, this resin benefits from pre-warming and longer drain times after printing. The solid density of 1.15 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from 3D Systems for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About 3D Systems
Pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. Its industrial Figure 4, ProJet/VisiJet and Accura material lines cover prototyping and production.
Headquarters: Rock Hill, SC, USA
View all resins from 3D Systems →
Frequently Asked Questions
What is FLEX-BLK 10 used for?
FLEX-BLK 10 is primarily suited for tough, impact-resistant applications. making it a good choice for demanding 3D printing applications.
How much does FLEX-BLK 10 cost?
FLEX-BLK 10 is priced at approximately €240.00. Check 3D Systems's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from 3D Systems →