MED-WHT 10
Manufacturer: 3D Systems
Type: Medical
MED-WHT 10 is a Medical resin manufactured by 3D Systems, pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. With 3% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately €250.00.
Key Properties
- Elongation at Break: 3% — minimal stretch — rigid
- Viscosity: 937 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 17 J/m — low impact toughness
Best Applications for MED-WHT 10
- General-purpose SLA/MSLA 3D printing projects
- Rapid prototyping and modelling
Technical Specifications
Technical data for MED-WHT 10| Resin Type | Medical |
|---|
| Shore Hardness | Shore D 84 |
|---|
| Viscosity | 937 cP mPa·s |
|---|
| Solid Density | 1.27 g/cm³ g/cm³ |
|---|
| Tensile Strength | 60 MPa MPa |
|---|
| Young's Modulus | 3090 MPa MPa |
|---|
| Elongation at Break | 3%% |
|---|
| Flexural Modulus | 3290 MPa MPa |
|---|
| Flexural Strength | 112 MPa MPa |
|---|
| Izod Impact (Notched) | 17 J/m J/m |
|---|
| Price | €250.00 |
|---|
Handling & Printing Notes
With a viscosity of 937 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.27 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from 3D Systems for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About 3D Systems
Pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. Its industrial Figure 4, ProJet/VisiJet and Accura material lines cover prototyping and production.
Headquarters: Rock Hill, SC, USA
View all resins from 3D Systems →
Frequently Asked Questions
What is MED-WHT 10 used for?
MED-WHT 10 is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does MED-WHT 10 cost?
MED-WHT 10 is priced at approximately €250.00. Check 3D Systems's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from 3D Systems →