RUBBER-65A BLK
Manufacturer: 3D Systems
Type: Flexible
RUBBER-65A BLK is a Flexible resin manufactured by 3D Systems, pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. With 126% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. priced at approximately €240.00.
Key Properties
- Elongation at Break: 126% — stretches significantly before breaking — flexible
- Viscosity: 242 mPa·s — medium — flows well at room temperature
Best Applications for RUBBER-65A BLK
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for RUBBER-65A BLK| Resin Type | Flexible |
|---|
| Shore Hardness | Shore A 65 |
|---|
| Viscosity | 242 cP mPa·s |
|---|
| Solid Density | 1.12 g/cm³ g/cm³ |
|---|
| Tensile Strength | 5 MPa MPa |
|---|
| Young's Modulus | 23 MPa MPa |
|---|
| Elongation at Break | 126%% |
|---|
| Price | €240.00 |
|---|
Handling & Printing Notes
With a viscosity of 242 mPa·s, this resin flows well at room temperature. The solid density of 1.12 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from 3D Systems for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About 3D Systems
Pioneer of 3D printing (founder Chuck Hull, inventor of SLA) based in Rock Hill, SC. Its industrial Figure 4, ProJet/VisiJet and Accura material lines cover prototyping and production.
Headquarters: Rock Hill, SC, USA
View all resins from 3D Systems →
Frequently Asked Questions
What is RUBBER-65A BLK used for?
RUBBER-65A BLK is primarily suited for general-purpose 3D printing. making it a good choice for demanding 3D printing applications.
How much does RUBBER-65A BLK cost?
RUBBER-65A BLK is priced at approximately €240.00. Check 3D Systems's website or authorised retailers for current pricing and availability.
← Browse all resins |
All resins from 3D Systems →