SiOmaster
Manufacturer: AmeraLabs
Type: Tooling
SiOmaster is a Tooling resin manufactured by AmeraLabs, ameraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. With a shore hardness of 80D, and tensile stress at yield of 43.5 MPa, and 44.3% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Grey, priced at approximately $38.00.
Key Properties
- Hardness: 80D Shore — very rigid
- Tensile Strength: 43.5 MPa at yield — moderate tensile strength
- Elongation at Break: 44.3% — stretches significantly before breaking — flexible
- Viscosity: 660 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 5.71 J/m — low impact toughness
Best Applications for SiOmaster
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for SiOmaster| Resin Type | Tooling |
|---|
| Shore Hardness | 80D |
|---|
| Viscosity | 660 mPa·s |
|---|
| Solid Density | 1.222 g/cm³ |
|---|
| Colour Options | Grey |
|---|
| Tensile Stress at Yield | 43.5 MPa |
|---|
| Tensile Stress at Break | 37 MPa |
|---|
| Young's Modulus | 1870.0 MPa |
|---|
| Elongation at Break | 44.3% |
|---|
| Flexural Modulus | 1660.0 MPa |
|---|
| Flexural Stress at Yield | 64.2 MPa |
|---|
| Flexural Stress at Break | MPa |
|---|
| Izod Impact (Notched) | 5.71 J/m |
|---|
| Price | $38.00 |
|---|
Handling & Printing Notes
With a viscosity of 660 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.222 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from AmeraLabs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About AmeraLabs
AmeraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. Products cover miniatures, dental, engineering, and specialty applications.
Headquarters: Lithuania
View all resins from AmeraLabs →
Frequently Asked Questions
What is SiOmaster used for?
SiOmaster is primarily suited for general-purpose 3D printing. Its 80D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Grey.
How much does SiOmaster cost?
SiOmaster is priced at approximately $38.00. Check AmeraLabs's website or authorised retailers for current pricing and availability.
What shore hardness is SiOmaster?
SiOmaster has a shore hardness of 80D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from AmeraLabs →