XVN-50
Manufacturer: AmeraLabs
Type: Engineering
XVN-50 is a Engineering resin manufactured by AmeraLabs, ameraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. With a shore hardness of 82D, and tensile stress at yield of 43.4 MPa, and 51.2% elongation at break, this resin is designed for applications requiring general-purpose 3D printing. available in Black, priced at approximately $40.00.
Key Properties
- Hardness: 82D Shore — very rigid
- Tensile Strength: 43.4 MPa at yield — moderate tensile strength
- Elongation at Break: 51.2% — stretches significantly before breaking — flexible
- Viscosity: 560 mPa·s — medium-high — may benefit from slight warming before use
- Impact Resistance: 5.9 J/m — low impact toughness
Best Applications for XVN-50
- Flexible and impact-resistant parts
- Snap-fit components and living hinges
Technical Specifications
Technical data for XVN-50| Resin Type | Engineering |
|---|
| Shore Hardness | 82D |
|---|
| Viscosity | 560 mPa·s |
|---|
| Solid Density | 1.213 g/cm³ |
|---|
| Colour Options | Black |
|---|
| Tensile Stress at Yield | 43.4 MPa |
|---|
| Tensile Stress at Break | 37.5 MPa |
|---|
| Young's Modulus | 2030.0 MPa |
|---|
| Elongation at Break | 51.2% |
|---|
| Flexural Modulus | 1820.0 MPa |
|---|
| Flexural Stress at Yield | 62.3 MPa |
|---|
| Izod Impact (Notched) | 5.9 J/m |
|---|
| Price | $40.00 |
|---|
Handling & Printing Notes
With a viscosity of 560 mPa·s, this resin may benefit from slight warming before use in colder environments. The solid density of 1.213 g/cm³ is typical for photopolymer resins. Always refer to the official technical datasheet from AmeraLabs for recommended print settings, exposure times, and post-curing instructions. Safety data is available in the SDS/MSDS document.
Similar Resins to Consider
About AmeraLabs
AmeraLabs develops and manufactures high-quality 3D printing resins for MSLA resin 3D printers. Products cover miniatures, dental, engineering, and specialty applications.
Headquarters: Lithuania
View all resins from AmeraLabs →
Frequently Asked Questions
What is XVN-50 used for?
XVN-50 is primarily suited for general-purpose 3D printing. Its 82D Shore hardness means it is very rigid, making it a good choice for demanding 3D printing applications and is available in Black.
How much does XVN-50 cost?
XVN-50 is priced at approximately $40.00. Check AmeraLabs's website or authorised retailers for current pricing and availability.
What shore hardness is XVN-50?
XVN-50 has a shore hardness of 82D, which classifies it as very rigid compared to most other resins.
← Browse all resins |
All resins from AmeraLabs →